Concentric Reducer
De Concentric Reducer is leverbaar met zowel een PFA- als PTFE-lining en is geschikt voor het verbinden van leidingen met verschillende diameters binnen industriële leidingsystemen.
Voor specifieke toepassingen zijn ook alternatieve lining-materialen mogelijk, zoals PP, PE, ETFE en PFA rotational lining, waardoor de Concentric Reducer kan worden afgestemd op afwijkende inbouwmaten en procescondities.
De lining is verkrijgbaar in zowel virgin als antistatische uitvoering.
Dimensional Data
| A-NB | B-NB | C | T* | Weight | ||
|---|---|---|---|---|---|---|
| inch | DN | inch | DN | mm | mm | kg |
| 1” | 25 | ½” | 15 | 114 | 3.0 | 2 |
| 1” | 25 | 3/4” | 20 | 114 | 3.0 | 2 |
| 1 1/2” | 40 | 1/2” | 15 | 114 | 3.0 | 3 |
| 1 1/2” | 40 | 3/4” | 20 | 114 | 4.0 | 3 |
| 1 1/2” | 40 | 1” | 25 | 114 | 3.0 | 3 |
| 2” | 50 | 1” | 25 | 127 | 4.0 | 4 |
| 2” | 50 | 1 1/2” | 40 | 127 | 3.0 | 5 |
| 3” | 80 | 1” | 25 | 152 | 3.0 | 6 |
| 3” | 80 | 1 1/2” | 40 | 152 | 4.0 | 7 |
| 3” | 80 | 2” | 50 | 152 | 3.0 | 8 |
| 3” | 80 | 2 1/2” | 65 | 152 | 3.0 | 9 |
| 4” | 100 | 1” | 25 | 178 | 4.0 | 10 |
| 4” | 100 | 1 1/2” | 40 | 178 | 4.0 | 10 |
| 4” | 100 | 2” | 50 | 178 | 4.0 | 11 |
| 4” | 100 | 2 1/2” | 65 | 178 | 4.5 | 12 |
| 4” | 100 | 3” | 80 | 178 | 4.0 | 13 |
| 6” | 150 | 1” | 25 | 229 | 4.0 | 18 |
| 6” | 150 | 1 1/2” | 40 | 229 | 4.0 | 19 |
| 6” | 150 | 3” | 80 | 229 | 4.0 | 20 |
| 6” | 150 | 4” | 100 | 229 | 6.0 | 23 |
| 6” | 150 | 5” | 125 | 229 | 6.0 | 24 |
| 8” | 200 | 4” | 100 | 279 | 6.0 | 24 |
| 8” | 200 | 6” | 150 | 279 | 6.0 | 35 |
| 10” | 250 | 4” | 100 | 305 | 6.0 | 48 |
| 10” | 250 | 6” | 150 | 305 | 6.0 | 48 |
| 10” | 250 | 8” | 200 | 305 | 6.0 | 57 |
| 12” | 300 | 8” | 200 | 356 | 6.0 | 77 |
| 12” | 300 | 10” | 250 | 356 | 6.0 | 86 |
| A | B | C | T* | Weight |
|---|---|---|---|---|
| DN | DN | mm | mm | = kg |
| 25 | 15 | 120 | 3.0 | 2.4 |
| 25 | 20 | 125 | 3.0 | 2.3 |
| 40 | 15 | 130 | 3.0 | 3.0 |
| 40 | 20 | 145 | 4.0 | 3.1 |
| 40 | 25 | 145 | 3.0 | 3.3 |
| 40 | 32 | 150 | 3.0 | 4.3 |
| 50 | 25 | 160 | 4.0 | 4.1 |
| 50 | 32 | 165 | 3.0 | 4.5 |
| 50 | 40 | 165 | 3.0 | 4.8 |
| 80 | 25 | 185 | 4.0 | 6.7 |
| 80 | 32 | 185 | 4.0 | 6.3 |
| 80 | 40 | 185 | 4.0 | 6.3 |
| 80 | 50 | 190 | 3.0 | 6.9 |
| 80 | 65 | 190 | 4.0 | 7.5 |
| 100 | 25 | 200 | 4.0 | 10.2 |
| 100 | 40 | 200 | 4.0 | 10.0 |
| 100 | 50 | 200 | 4.0 | 9.4 |
| 100 | 65 | 200 | 4.0 | 9.9 |
| 100 | 80 | 205 | 4.5 | 10.6 |
| 150 | 25 | 250 | 4.0 | 19.0 |
| 150 | 40 | 250 | 4.0 | 19.5 |
| 150 | 80 | 250 | 4.0 | 17.4 |
| 150 | 100 | 250 | 6.0 | 18.3 |
| 200 | 100 | 270 | 6.0 | 22.1 |
| 200 | 150 | 270 | 6.0 | 25.2 |
| 250 | 100 | 305 | 6.0 | 31.0 |
| 250 | 150 | 305 | 6.0 | 35.0 |
| 250 | 200 | 310 | 6.0 | 37.8 |
| 300 | 200 | 335 | 6.0 | 48.0 |
| 300 | 250 | 340 | 6.0 | 52.6 |
Specificaties
Materiaal
Lining opties
Lining uitvoering
*De dikte van de liner is indicatief en kan per productiebatch licht variëren binnen de vastgestelde toleranties.
